EMI

Engineered Mills, Inc.
and Mixers
888 East Belvidere Rd.
Grayslake, IL 60030 USA

Tel: 847-548-0044
Fax: 847-548-0099
E-mail:
sales@EMImills.com

Mini Mills
M-2 Mills
Pilot Mills
Production Mills
Microtron Mill
Laboratory Mixers
& Dispersers
Industries Served
Bench Stirrers
Chillers
Grinding Media
Media Info
Contact Us
Home

Engineered Mills & Mixers

M-2 Mills

Self Pumping Laboratory Bead Mill

M-2 MILLS ARE USED FOR WET MILLING, FINE GRINDING AND DISPERSING OF LARGER LABORATORY SAMPLES

Operation is similar to the Mini series mills.

  • Single pass or high flow re-circulation
  • Self contained milling system.
  • Self pumping, includes a two stage arrangement.
  • In line mixing prior to milling improves efficiency.
  • 5 horsepower.
  • General purpose & explosion proof motors & controls.
  • Optional intrinsically safe controls available.
  • 2 to 20 liters feed funnels.
  • Optional funnel mixers.
  • Stainless steel construction.
  • Polyurethane and ceramic available.

General Operation - Products to be ground are premixed, poured into the feed funnel where they are pumped into the milling chamber and an agitated bed of grinding beads. These beads can be glass, ceramic or steel and range in size from 0.3mm to 3 mm in diameter. The agitator rotational speed is electronically controlled. Product quality is determined by adjusting the chamber residence time using the metering discharge valve located at the chamber end and by adjusting tip speed and product formulation. The chamber and seal housing are water jacketed for efficient cooling.
Questions: Contact 847-548-0044 - Dave.Peterson@EMImills.com